Biochar imparted constructed wetlands (CWs) for enhanced biodegradation of organic and inorganic pollutants along with its limitation.

The remediation of polluted soil and water stands as a paramount task in safeguarding environmental sustainability and ensuring a dependable water source. Biochar, celebrated for its capacity to enhance soil quality, stimulate plant growth, and adsorb a wide spectrum of contaminants, including organic and inorganic pollutants, within constructed wetlands, emerges as a promising solution. This review article is dedicated to examining the effects of biochar amendments on the efficiency of wastewater purification within constructed wetlands. This comprehensive review entails an extensive investigation of biochar's feedstock selection, production processes, characterization methods, and its application within constructed wetlands. It also encompasses an exploration of the design criteria necessary for the integration of biochar into constructed wetland systems. Moreover, a comprehensive analysis of recent research findings pertains to the role of biochar-based wetlands in the removal of both organic and inorganic pollutants. The principal objectives of this review are to provide novel and thorough perspectives on the conceptualization and implementation of biochar-based constructed wetlands for the treatment of organic and inorganic pollutants. Additionally, it seeks to identify potential directions for future research and application while addressing prevailing gaps in knowledge and limitations. Furthermore, the study delves into the potential limitations and risks associated with employing biochar in environmental remediation. Nevertheless, it is crucial to highlight that there is a significant paucity of data regarding the influence of biochar on the efficiency of wastewater treatment in constructed wetlands, with particular regard to its impact on the removal of both organic and inorganic pollutants.

Exploring zeolite-based composites in adsorption and photocatalysis for toxic wastewater treatment: Preparation, mechanisms, and future perspectives.

Water scarcity has become a critical global concern exacerbated by population growth, globalization, and industrial expansion, resulting in the production of wastewater containing a wide array of contaminants. Tackling this challenge necessitates the adoption of innovative materials and technologies for effective wastewater treatment. This review article provides a comprehensive exploration of the preparation, applications, mechanisms, and economic environmental analysis of zeolite-based composites in wastewater treatment. Zeolite, renowned for its versatility and porous nature, is of paramount importance due to its exceptional properties, including high surface area, ion exchange capability, and adsorption capacity. Various synthetic methods for zeolite-based composites are discussed. The utilization of zeolites in wastewater treatment, particularly in adsorption and photocatalysis, is thoroughly investigated. The significance of zeolite in adsorption and its role in the photocatalytic degradation of pollutants are examined, along with its applications in treating volatile organic compounds (VOCs), dye wastewater, oil-field wastewater, and radioactive waste. Mechanisms underlying zeolite-based adsorption and photocatalysis, including physical and chemical adsorption, ion exchange, and surface modification, are elucidated. Additionally, the role of micropores in the adsorption process is explored. Furthermore, the review delves into regeneration and desorption studies of zeolite-based composites, crucial for sustainable wastewater treatment practices. Economic and environmental analyses are conducted to assess the feasibility and sustainability of employing zeolite-based composites in wastewater treatment applications. Future recommendations are provided to guide further research and development in the field of zeolite-based composites, aiming to enhance wastewater treatment efficiency and environmental sustainability. By exploring the latest advancements and insights into zeolite-based nanocomposites, this paper aims to contribute to the development of more efficient and sustainable wastewater treatment strategies. The integration of zeolite-based materials in wastewater treatment processes shows promise for mitigating water pollution and addressing water scarcity challenges, ultimately contributing to environmental preservation and public health protection.

Actas Pink-2B dye removal in biochar nanocomposites augmented vertical flow constructed wetland (VF-CWs).

Industries generate hazardous dye wastewater, posing significant threats to public health and the environment. Removing dyes before discharge is crucial. The ongoing study primarily focused on synthesizing, applying, and understanding the mechanism of green nano-biochar composites. These composites, including zinc oxide/biochar, copper oxide/biochar, magnesium oxide/biochar, and manganese oxide/biochar, are designed to effectively remove Actas Pink-2B (Direct Red-31) in conjunction with constructed wetlands. Constructed wetland maintained pH 6.0-7.9. At the 10th week, the copper oxide/biochar treatment demonstrated the highest removal efficiency of total suspended solids (72%), dissolved oxygen (7.2 mg/L), and total dissolved solids (79.90%), followed by other biochar composites. The maximum removal efficiency for chemical oxygen demand (COD) and color was observed at a retention time of 60 days. The electrical conductivity also followed the same order, with a decrease observed up to the 8th week before becoming constant. A comprehensive statistical analysis was conducted, encompassing various techniques including variance analysis, regression analysis, correlation analysis, and principal component analysis. The rate of color and COD removal followed a second-order and first-order kinetics, respectively. A significant negative relationship was observed between dissolved oxygen and COD. The study indicates that employing biochar composites in constructed wetlands improves textile dye removal efficiency.

The novelty of this study is the selection of Cymbopogon as a proper plant for phytoremediation of dye along with green metal oxide coated biochar. These were selected due to their good ability to remove organic pollutant. This study demonstrates the uptake and degradation processes of persistent dye in constructed wetland.

Advanced oxidation/reduction processes (AO/RPs) for wastewater treatment, current challenges, and future perspectives: a review.

Advanced oxidation/reduction processes (AO/RPs) are considered as effective water treatment technologies and thus could be used to solve the problem of water pollution. These technologies of wastewater treatment involve the production of highly reactive species such as •OH, H•, e-aq, SO4•-, and SO3•-. These radicals can attack the targeted contaminants present in aqueous media and result in their destruction. The efficiency of AO/RPs is highly affected by various operational parameters such as initial concentration of contaminant, solution pH, catalyst amount, intensity of light source, nature of oxidant and reductant used, and the presence of various ionic species in aquatic media. Among AO/RPs, the solar light-based AO/RPs are most widely used nowadays for contaminant removal from aqueous media because of their high environmental friendliness and cost effectiveness. By using these techniques, almost all types of pollutants can be easily removed from aquatic media within short intervals of time, and hence, the problem of water pollution can be solved effectively. This review focuses on various AO/RPs used for wastewater treatment. The effects of different operational parameters that affect the efficiency of these processes toward contaminant removal have been discussed. Besides, challenges and future recommendations are also briefly provided for the researchers in order to improve the efficiency of these processes.

Trends and social aspects in the management and conversion of agricultural residues into valuable resources: A comprehensive approach to counter environmental degradation, food security, and climate change.

The circular economy is essential as it encourages the reuse and recycling of resources while reducing waste, which ultimately helps to reduce environmental pollution and boosts economic efficiency. The current review highlights the management of agricultural and livestock residues and their conversion into valuable resources to combat environmental degradation and improve social well-being. The current trends in converting agricultural residues into useful resources emphasize the social benefits of waste management and conversion. It also emphasizes how waste conversion can reduce environmental degradation and enhance food security. Using agricultural residues can increase soil health and agricultural output while reducing pollution, greenhouse gas emissions, and resource depletion. Promoting sustainable waste-to-resource conversion processes requires a combination of strategies that address technical, economic, social, and environmental aspects. These multiple strategies are highlighted along with prospects and considerations.

Utilization of ZnFe2O4-Polyaniline (PANI), ZnFe2O4-Polystyrene (PST), and ZnFe2O4-Polypyrrole (PPy) nanocomposites for removal of Red X-GRL and Direct Sky Blue dyes from wastewater: Equilibrium, kinetic and thermodynamic studies.

In this study, ZnFe2O4-Polyaniline (PANI), ZnFe2O4-Polystyrene (PST), and ZnFe2O4-Polypyrrole (Ppy) nanocomposites were synthesized by the adsorption method and characterized by field emission scanning electron microscopy and Fourier transform infrared spectrometer. Batch adsorption experiments were conducted for removing two types of hazardous dyes Red X-GRL and Direct Sky Blue 51 from an aqueous solution and the effect of pH, adsorbent dosage, contact time, and initial concentration of dyes were investigated. Meanwhile, kinetic, isotherm, and thermodynamic parameters were also determined. The electrolyte and surfactant effect was also tested for the prepared nanocomposites. To test the reusability desorption study was also conducted.

The Fabrication of Halogen-Doped FeWO4 Heterostructure Anchored over Graphene Oxide Nanosheets for the Sunlight-Driven Photocatalytic Degradation of Methylene Blue Dye.

Rapid industrialization and urbanization are the two significant issues causing environmental pollution. The polluted water from various industries contains refractory organic materials such as dyes. Heterogeneous photocatalysis using semiconductor metal oxides is an effective remediation technique for wastewater treatment. In this research, we used a co-precipitation-assisted hydrothermal method to synthesize a novel I-FeWO4/GO sunlight-active nanocomposite. Introducing dopant reductive iodine species improved the catalytic activity of FeWO4/GO. I- ions improved the catalytic performance of H2O2 by doping into FeWO4/GO composite. Due to I- doping and the introduction of graphene as a support medium, enhanced charge separation and transfer were observed, which is crucial for efficient heterogeneous surface reactions. Various techniques, like FTIR, SEM-EDX, XRD, and UV-Vis spectroscopy, were used to characterize composites. The Tauc plot method was used to calculate pristine and iodine-doped FeWO4/GO bandgap. Iodine doping reduced the bandgap from 2.8 eV to 2.6 eV. The degradation of methylene blue (MB) was evaluated by optimizing various parameters like catalyst concentration, oxidant dose, pH, and time. The optimum conditions for photocatalysts where maximum degradation occurred were pH = 7 for both FeWO4/GO and I-FeWO4/GO; oxidant dose = 9 mM and 7 mM for FeWO4/GO and I-FeWO4/GO; and catalyst concentration = 30 mg and 35 mg/100 mL for FeWO4/GO and I-FeWO4/GO; the optimum time was 120 min. Under these optimum conditions, FeWO4/GO and I-FeWO4/GO showed 92.0% and 97.0% degradation of MB dye.

Thinking about the consequences: The detrimental role of future thinking on intrapersonal problem-solving in depression.

Despite the fact that depressed individuals encounter a multitude of social problems in daily life, research on social problem-solving has largely been dominated by research on interpersonal problems and there is a paucity of research on intrapersonal problems. Intrapersonal problems are linked to one's subjective psychological functioning and involve managing one's own feelings and emotions pertaining to the self. Given that depressed individuals exhibit impaired emotion regulation, it is possible that their ability to solve intrapersonal problems may be impaired, especially in relation to future thinking. The aim of this study was to investigate whether future thinking, in the form of thinking about the consequences of a problem being resolved or remaining unresolved has an impact on intrapersonal problem-solving in depression. Forty-five depressed and fifty-four non-depressed participants completed a modified version of the means end problem-solving task (MEPS). In the task, participants were presented with a series of intrapersonal problems and were asked to generate consequences of the problems being resolved or remaining unresolved. Participants were then presented with a positive resolution to each of the problems and were asked to solve the problem to achieve the positive resolution. Following a delay, participants were asked to recall all of the consequences initially generated. Overall, depressed individuals generated fewer-relevant means and less effective solutions to problems than non-depressed participants. Depressed individuals also demonstrated impaired intrapersonal problem-solving following the generation of resolved and unresolved consequences, compared to a baseline condition, where no consequences were generated. These findings suggest that future thinking impairs intrapersonal problem-solving and indicates that a more nuanced approach to future thinking and social problem-solving in depression is needed across different real-life problem-solving contexts.

Analysis of Homogeneous/Heterogeneous Reactions in an Electrohydrodynamic Environment Utilizing the Second Law.

In this study, we investigate what happens to entropy in the presence of electrokinetic phenomena. It is speculated that the microchannel has an asymmetrical and slanted configuration. The presence of fluid friction, mixed convection, Joule heating, presence and absence of homogeneity, and a magnetic field are modelled mathematically. It is also emphasized that the diffusion factors of the autocatalyst and the reactants are equal. The governing flow equations are linearized using the Debye-Huckel and lubrication assumptions. The resulting nonlinear couple differential equations are solved using the program's integrated numerical solver, Mathematica. We take a graphical look at the results of homogeneous and heterogeneous reactions and talk about what we see. It has been demonstrated that homogeneous and heterogeneous reaction parameters affect concentration distribution f in different ways. The Eyring-Powell fluid parameters B1 and B2 display an opposite relation with the velocity, temperature, entropy generation number, and Bejan number. The mass Grashof number, the Joule heating parameter, and the viscous dissipation parameter all contribute to the overall increase in fluid temperature and entropy.

Synergistic effect of microwave heating and thermosonication on the physicochemical and nutritional quality of muskmelon and sugarcane juice blend.

Melons (Cucumis melo L.) are highly popular due to its delicate and delightful flavor in the worldwide. However, the flavor of the melon juice was easily affected by thermal treatments and unpleasant cooking smell during production process. Sugarcane (Saccharum officinarum) juice is a proven nutritious beverage with high levels of antioxidants, polyphenols, and other beneficial nutrients. Due to its low sugar content, combined with sugarcane, muskmelon-sugarcane blend juice gives an appealing and exotic drink. The research was planned to evaluate the effect of thermo-sonication (20 kHz, 70% amplitude, 5, 10 and 15 min) and microwave (90 °C, 400 W, 120 sec) on physicochemical parameters including pH, titratable acidity, total soluble solids (TSS), total phenolic contents (TPC), total flavonoid contents (TFC) and antioxidant capacity of muskmelon and sugarcane juice blend, during storage of 90 days at refrigeration (4±1 °C). The statistical results showed that synergism of sonication and microwave treatments had a significant (p ≤ 0.05) influence on pH, TSS, titratable acidity, TPC, TFC and antioxidant capacity. T3 (15 min of sonication and 120 s of microwave) showed the maximum TSS (12.00±0.40 °B), pH (5.07±0.02), TPC (484.33±10.41 mg GAE/100 mL), TFC (261.73±11.32 mg CE/100 mL), and antioxidant activity (381.62±17.72 µg AAE/100 mL), as compared to untreated samples. Thermosonication for 15 min caused maximum retention of TPC, TFC and antioxidant capacity of blend juice during 90 days of storage, whereas in untreated samples these parameters were found highly decreased during storage. Thus, sonication and microwave can be recommended as an alternative to both conventional pasteurization processes and chemical preservatives.

Assessment of risk factors and preventive measure compliance against COVID-19 among healthcare workers at tertiary care hospital: a retrospective study.

Introduction: SARS-CoV-2 has created a significant challenge to healthcare systems, since the disease has spread rapidly, outweighing hospital capacity and exposing Health Care Workers (HCWs) to the risk of infection. The main objective of this study shows the HCW's self-reported use of Personal Protective Equipment (PPE), symptoms, and exposure to revealed and suspected people during the pandemic, as well as the implementation of infection prevention and control (IPC) guidelines that effectively limit the spread of the infection among healthcare personnel. Method: A single-center retrospective cohort study has been done at a tertiary care hospital. There were 3,651 hospital employees of these 1,890 HCWs and 1,761 nonclinical staff among those who were proven or suspected COVID-19 cases and had symptoms were included. The data was gathered using a standardized self-assessment questionnaire. Information about quarantine protocol and line listing was collected through telephonic conversations. Result: The majority of the participants were males (66%). The average age was 32.1±7.62. Out of 432 HCWs, 32.9% with positive SARS-CoV-2 PCR findings were nurses, 19.2% were doctors, and 47.9% were non-clinical employees from the hospital's inpatient and outpatient departments. 31.5% had a higher-risk exposure, 64.1% had a moderate-risk exposure, and 4.4% of practitioners with COVID-19 had a lower-risk exposure. A statistically significant association was found between COVID-19 disease and adherence to PPE and risk exposure. Conclusion: This study represents the healthcare workers' experience with COVID-19 patients in the early stages of the pandemic and emphasizes the measures required to overcome the problems, however, this study highlights that HCWs are being progressively infected with COVID-19 as a result of inadequate/ inappropriate PPE wear.

Green metal oxides coated biochar nanocomposites preparation and its utilization in vertical flow constructed wetlands for reactive dye removal: Performance and kinetics studies.

Major causes of water pollution in the ecosystem are pollutants such as dyes which are noxious. The present study was based on the synthesis of the green nano-biochar composites from cornstalk and green metal oxide resulting in Copper oxide/biochar, Zinc oxide /biochar, Magnesium oxide/biochar, Manganese oxide/biochar, biochar for removal of dyes combined with the constructed wetland (CW). Biochar Augmentation in constructed wetland systems has improved dye removal efficiency to 95% in order of copper oxide/biochar > Magnesium oxide/biochar > Zinc oxide/biochar > Manganese oxide/biochar > biochar > control (without biochar) respectively in wetlands. It has increased the efficiency of pH by maintaining pH 6.9-7.4, while Total Suspended Solids (TSS) removal efficiency and Dissolved oxygen (DO) increased with the hydraulic retention time of about 7 days for 10 weeks. Chemical oxygen demand (COD) and colour removal efficiency increased with the hydraulic retention time of 12 days for 2 months and there was a low removal efficiency for total dissolved solids (TDS) from control (10.11%) to Copper oxide /biochar (64.44%) and Electrical conductivity (EC) from control (8%) to Copper oxide /biochar (68%) with the hydraulic retention time of about 7 days for 10 weeks. Colour and chemical oxygen demand removal kinetics followed second and first-order kinetic. A significant growth in the plants were also observed. These results proposed the use of agricultural waste-based biochar as part of a constructed wetland substratum can provide enhanced removal of textile dyes. That can be reused.

In Vitro Role of Pumpkin Parts as Pharma-Foods: Antihyperglycemic and Antihyperlipidemic Activities of Pumpkin Peel, Flesh, and Seed Powders, in Alloxan-Induced Diabetic Rats.

Pumpkin is a well-known vegetable, among the members of Cucurbitaceae family, due to its importance as pharma food. Keeping in view the antidiabetic and plasma lipids lowering potential of pumpkin, the present study was conducted to investigate that, which part of pumpkin (peel, flesh, and seeds), possess more bioactive compounds, exhibiting antihyperglycemic and antihyperlipidemic potential. Albino rats with 190-210 g body weight were divided into 11 groups. Five rats were included in each group; group A was negative control, group B was positive control, and groups C to K were diabetic rats fed with pumpkin peel, flesh, and seed powders. Diabetes was induced in rats with the help of alloxan monohydrate. During 28 days of experimental period, blood glucose level of different rat's groups was checked with the help of glucometer, at every 7 days interval and at the end of 28 days study, plasma lipids were checked with the help of commercial kits. A significant decrease in blood glucose level (128.33 ± 1.67 mg/dl), TC (88.43 ± 0.66 mg/dl), TG (69.79 ± 0.49 mg/dl), and LDL-C (21.45 ± 0.08 mg/dl) was recorded in rat groups fed with 15 g pumpkin seed powder, at the end of study. After pumpkin seeds, second significant antihyperglycemic and antihyperlipidemic effect was recorded in rat's groups fed with 15 g pumpkin peel powder. Pumpkin flesh powder effect in lowering blood glucose level and plasma lipids was less significant as compared to seeds and peel powder. As the dose of the pumpkin powders was increased from 5 to 10 and then 15 g, the blood glucose-lowering and plasma lipid-lowering effect became more significant. Similarly, as the experimental duration was expanded from first week to 28 days, this antihyperglycemic and antihyperlipidemic effect became more significant. These results were sufficient to conclude that pumpkin has high potential to be used in human diet to cope with noncommunicable diseases like diabetes and hypercholesterolemia.

Fabrication of Novel Agrowaste (Banana and Potato Peels)-Based Biochar/TiO2 Nanocomposite for Adsorption of Cr(VI), Statistical Optimization via RSM Approach.

In this research work, a simple, efficient, and eco-friendly procedure for the biosorption of Cr(VI) ions was studied. A detailed comparative study was performed to check the adsorption efficiency of agrowaste (banana and potato peels)-based adsorbents. Firstly, mixed biosorbent was washed, dried and ground into powder, secondly, biosorbent was pyrolyzed into biochar and thirdly TiO2 nanocomposite (TiO2 NC) biosorbent was made by sonicating using prepared biochar and TiO2 NPs. Titanium dioxide nanoparticles (TiO2 NPs) were synthesized by a green method using Psidium guajava leaf extract. The synthesized adsorbents were characterized by SEM, EDX FT-IR, XRD and UV-visible analysis. The effect of four different factors, i.e., pH of the synthetic metallic solution, time, concentration and adsorbent dosage was studied. The optimum conditions were time (120 min), pH (3), concentration (10 ppm) and adsorbent dosage (1.0 g). The kinetic modeling showed that the adsorption of Cr(VI) ion follows a pseudo second-order mechanism and the Langmuir isotherm model was found to fit better for this study. Response surface methodology (RSM)-based optimized parameters provided optimal parameter sets that better represent the adsorption rate models. The uptake capacity of Cr(VI) from aqueous solution was found to be biomass (76.49 mg/L) ˂ biochar (86.51 mg/L) ˂ TiO2 NC (92.89 mg/L). It can be suggested that the produced TiO2 NC could possibly be an efficient biosorbent for the removal of Cr(IV).

In the here and now: Future thinking and social problem-solving in depression.

This research investigates whether thinking about the consequences of a problem being resolved can improve social problem-solving in clinical depression. We also explore whether impaired social problem solving is related to inhibitory control. Thirty-six depressed and 43 non-depressed participants were presented with six social problems and were asked to generate consequences for the problems being resolved or remaining unresolved. Participants were then asked to solve the problems and recall all the consequences initially generated. Participants also completed the Emotional Stroop and Flanker tasks. We found that whilst depressed participants were impaired at social problem-solving after generating unresolved consequences, they were successful at generating solutions for problems for which they previously generated resolved consequences. Depressed participants were also impaired on the Stroop task, providing support for an impaired inhibitory control account of social problem-solving. These findings advance our understanding of the mechanisms underpinning social problem-solving in depression and may contribute to the development of new therapeutic interventions to improve social-problem solving in depression.

Chemically modified sugarcane bagasse-based biocomposites for efficient removal of acid red 1 dye: Kinetics, isotherms, thermodynamics, and desorption studies.

Novel eco-friendly and economically favourable chemically modified biosorbents and biosomposites from sugarcane bagasse (SB) has been investigated for the first time for efficient removal of Acid red 1 dye from wastewater. As fabricated biosorbents and biocomposites were characterized analytically. Batch adsorption experiments has been performed to optimize operating parameters and the determined optimum conditions are; pH: 2, dose: 0.05 g, contact time: between 60 and 75 min, initial dye concentration: 400 mg L-1, and temperature: 30 °C, at which maximum Acid red 1 dye removal capacities were found (within range of 143.4-205.1 mg g-1) by as-designed SB-derived chemically modified biosorbents and biocomposites. This high adsorption capacity was accompanied due to its large specific surface area (30.19 m2 g-1) and excessive functional active binding sites. In terms of the nature of adsorption process, kinetic and isothermal studies demonstrated that experimental data shows greater fitness with pseudo 2nd order and Langmuir model. Thermodynamics analysis revealed that the adsorption process is spontaneous, feasible, and exothermic in nature. Adsorption selective studies signifies that lower concentration of co-existing metallic ions were not interfered during the removal of Acid red 1 dye, which confirms that under optimized adsorption conditions the biosorbents and biocomposites exhibited greater affinity for dye molecules. The excessive quantity (82%) of loaded dye molecules within the adsorbents were extracted within the NaOH eluting media which predicts that as designed biocomposites could have capability of reusability. Hence, it is anticipated that this type of novel SB-derived biocomposites could be considered as greener potential candidate material for commercial scale dye removal applications from industrial wastewater.

Utilization of pumpkin, pumpkin powders, extracts, isolates, purified bioactives and pumpkin based functional food products: A key strategy to improve health in current post COVID 19 period: An updated review.

Progression of today's world has been given setback due to the adversity of a novel, viral and deadly outbreak COVID 19, which raised the concerns of the scientists, researchers and health related officials about the inherent and adaptive immune system of the living body and its relation with healthy diet balanced with pharma foods. Choice of right food can help to build and boost adaptive immunity and pumpkin due to excellent profile of functional and nutraceutical constituents must be the part of both infected and non-infected person's daily diet. Vitamins, minerals, phenolic acids, essential oils, peptides, carotenoids and polysaccharides present in pumpkin could accommodate the prevailing deficiencies in the body to fought against the pathogens. Pumpkins are well equipped with nutraceuticals and functional ingredients therefore, consumption and processing of this remarkable fruit must be encouraged as pharma food due to its antihyperlipidemic, antiviral, anti-inflammatory, antihyperglycemic, immunomodulatory, antihypertensive, antimicrobial and antioxidant potential, and these pharmacological properties of pumpkin are directly or indirectly related to the COVID 19 outbreak. Utilization of pumpkin has a domain in the form of powders, extracts, isolates, and pumpkin incorporated food products. A wide range of healthy, nutritious and functional food products has been developed from pumpkin, which includes juice, soup, porridge, chips, biscuits, bread, cake, bar and noodles. In recent times some innovative and novel technologies have been applied to process and preserve pumpkin for its enhanced shelf life and bioaccessibility of nutrients. Need of healthy eating in current post COVID 19 period is very crucial for healthy population, and medicinal foods like pumpkin, and bioactive compounds present in this functional food could play a vital role in developing a healthy community around the globe.

Mixed metal ferrite (Mn0.6Zn0.4Fe2O4) intercalated g-C3N4nanocomposite: efficient sunlight driven photocatalyst for methylene blue degradation.

Visible active mixed metal ferrite intercalated semiconductor photocatalyst Mn0.6Zn0.4Fe2O4/g-C3N4was prepared via facile hydrothermal and liquid assembly method for methylene blue (MB) dye degradation. The prepared samples were well characterized in term of their functional groups, crystallinity, elemental analysis, surface morphology using Fourier transform infrared spectroscopy, x-ray diffraction spectroscopy, energy dispersive x-ray, and scanning electron microscopy, respectively. The optical response of catalysts was checked by estimating the energy band gap (Eg) of semiconductor photocatalysts using UV-vis spectroscopy. The photoluminescence spectroscopy was also performed to estimate the reduction in emission intensity after insertion of g-C3N4into Mn0.6Zn0.4Fe2O4.The novel composition of Mn0.6Zn0.4Fe2O4with g-C3N4,improved the optical response of pristine photocatalysts due to the reduction in the energy band gap and insertion of heterojunction. The surface area analysis of Mn0.6Zn0.4Fe2O4and Mn0.6Zn0.4Fe2O4/g-C3N4were acquired by Brunauer-Emmett-Teller. Point zero charge was also determined to observe the surface behavior of composite under different solution pH. Various parameters such as pH, catalyst dose, oxidant dose, irradiation time and initial dye concentration were optimized, and their effects were studied in photo-Fenton process. It was observed that 98% MB dye was degraded under optimized conditions (pH = 8, composite dose = 50 mg/100 ml, oxidant dose = 7 mM, initial dye conc. = 10 ppm, and irradiation time = 120 min). The results showed that when the ferrites of mixed metals (Mn, Zn) were used with g-C3N4their photocatalytic activity enhanced due to mutual effect of both mixed metals ferrite and g-C3N4, which is considerably higher than their individual effect already reported. Furthermore, the combined effect of independent variables was evaluated by response surface methodology.

Moving on or deciding to let go? A pathway exploring the relationship between emotional and decisional forgiveness and intentional forgetting.

We report 3 empirical studies that represent the first systematic attempt to explore the relationship between emotional and decisional forgiveness and intentional forgetting. On this basis, we propose a model that provides a credible explanation for the relationship between forgiveness and forgetting. Specifically, we propose that engaging in emotional forgiveness promotes the psychological distancing of an offense, such that victims construe the offense at a higher and more abstract level. This high-level construal, in turn, promotes larger intentional forgetting effects, which, in turn, promote increased emotional forgiveness. Our studies found that participants in an emotional forgiveness manipulation reported increased psychological distance and recalled more high-level construals than did participants in either a decisional or no-forgiveness manipulation (Study 1). Using the list-method directed forgetting paradigm, we found that participants in an emotional forgiveness manipulation showed larger forgetting effects for both offense-relevant and -irrelevant information using both hypothetical (Study 2) and real-life (Study 3) moral transgressions compared with participants in either decisional or no-forgiveness manipulations. The potential implications of these findings for coping with unpleasant episodes in our lives are considered. (PsycInfo Database Record (c) 2021 APA, all rights reserved).

Chitosan, starch, polyaniline and polypyrrole biocomposite with sugarcane bagasse for the efficient removal of Acid Black dye.

Polymeric biocomposites (Polyaniline/sugarcane bagasse (Pan/SB), polypyrrole (PPy/SB), polyaniline/chitosan (PAn/Ch), polyaniline/starch (PAn/St) and polypyrrole/starch (PPy/St)) were prepared and applied for Acid Black-234 (AB-234) dye removal as a function of pH, reaction time, adsorbent dose, initial dye concentration and temperature. The optimum pH for the efficient adsorption for SB, PPy/SB, PAn/SB, PPy/Ch, PAn/Ch, PPy/St and PAn/St were 2, 3, 4, 4, 5, 3 and 3, respectively using adsorbent dose of 0.05 g for the reaction time of 60 min. The pseudo-first-order-kinetic model better explained the biosorption processes of SB, PAn/SB, PAn/Ch, PPy/St and PAn/St, while pseudo-second-order kinetic model better fitted to the kinetic data of PPy/SB and PPy/Ch. It was observed that the biosorption process of dye showed the satisfactory fitness for Langmuir isotherm for the biosorbents with maximum adsorption capacities 52.6, 100, 90.91, 90.0, 71.4, 66.6 and 62.5 for SB, PPy/SB, PAn/SB, PPy/Ch, PAn/Ch, PPy/St and PAn/St, respectively. The thermodynamic study revealed the exothermic nature of adsorption of dye on to biocomposites. Results revealed that polymeric biocomposites are efficient adsorbent and could possibly be used for the adsorption of dyes from textile wastewater.